Tag Archives: D&D

Crowdfunding Spotlight: Star Hat Miniatures: Heroic Scale Metal Figures Kickstarter

11 Aug

Well, how could I not feature this KS, given that the tagline for these minis is “Delvers Lost in the Dungeons of Doom!” it’s pretty much right up my alley! Star Hat miniatures are a company I haven’t come across before, but they have my attention now!

As you will gather, these are a set of generic adventurer types typical for dungeon exploration as per the usual RPG/wargaming fantasy fare. There is an old skool feeling to these, very similar to some ancient citadel sculpts and a few other older UK miniature firms work, which is a good thing, although some purists might disagree.

I like them, that’s for sure, and there are more than enough options for classes that’d fit many an RPG group needing some miniatures to fit their party for some dungeon bashing tomfoolery!

I feel that the only criticism I can aim at Star Hat Miniatures, is that the “Dungeons of Doom” moniker is used, and i should be at least getting a free set of them to pay for the favorable review and the royalty bonus for using that in the set title! But joking aside, they look fine to me and (hint, hint!) If you ever want me to review a set in person on here, please do!!!

No doubt this KS will be fully funded, as it’s already almost there, but do your bit and check them out if old skool D&D type figures is your thing. Check out the link to visit the project KS page for more info:


Grim’s Dungeons of Doom: You’ve made your bed, now stick it in your dungeon! Making 28mm beds!

10 Sep



Welcome to another Dungeons of Doom article, my attempt to cover pretty much every aspect of a modular dungeon build for 28mm dungeon crawling skirmishes and RPG. Further along with the furnishings of my dungeon build, as promised I’m taking on the subject of more 28mm furniture this time in the form of beds. Every mini dungeon should have some, don’t you think? it can easily set you back a fair few quid buying metal or resin versions, so why not just make some? These are easy compared to other stuff you might come to make for a project like this, so lets get cracking!


The build starts with our friend, the humble lollystick. As you can see above, I cut two pieces for the single bed, and three for a double version (just in case any of the dungeon denziens ever want to get jiggy!) Affix the pieces together to form the base. I used contact adhesive, but you could do as the tables tutorial, with a piece of card underneath if you prefer (whatever works for what materials you have) Measure if you want, I usually do as much as I can by eye, as I am lazy!


Next, cut a further two pieces that’ll form the head and foot boards. (They should be slightly smaller than the width of the bed frame) Glue them on.


Take some thin skewer type sticks and cut four lengths per bed to form the legs. Glue them on. Also don’t worry too much about how they sit flat, you can trim them later when everything is dry.



On the single, I added a small piece of EVA foam to simulate a mattress, and a small square for a pillow. (So that it’d bulk out the next bit.)


The Double bed skipped this step and I added a thick blanket instead. This blanket was made from some scraps of material taken from an old ripped sock (A clean one, not a smelly old one!) Most people I’ve seen doing similar beds have used toilet paper, but I opted for real material so I could capture some detail in the weave. The material was saturated in neat PVA before adding. Add more PVA if required to tidy up the scrawny edges. Leave to dry.


On the single I added a blanket in the same way using the material in PVA. Make it form creases by manipulating the piece as it starts to dry.



Form pillows by taking small rolled up scraps of the same material and adding PVA. Material soaked in white glue will be pliable and soft, so to some degree can be shaped, so go ahead and add your stuff, blankets and coverings and be as creative as you like.



When the PVA has mostly dried, to achieve a proper resin feel hardness, I used really thin, cheap superglue to plasticise the pieces, by allowing it to absorb into the PVA cloth. you’ll notice a strange chemical reaction between the glues, but don’t worry, this way will achieve a rock hard finish to the cloth. Who ever said cheap superglue was no good for anything?



Once dried, glue them onto a piece of card for basing, leave them to dry before cutting them out to your desired base sizes.


Undercoat black in your preferred method (or whichever undercoating style you usually use) then proceed to paint up as you would any other miniature or model.





I opted for a dirty scruffy sort, since these beds were destined for use in my dungeon, it made sense they were not clean and tidy (although, if yours are going in a castle or tavern type place, then you could make them as neat as you like) I also paid homage to the beds in Minecraft by making the single one red (since my kids play the hell out of it, it made sense since they’d be playing in the dungeon games too)

That’s all there is to it. Easy. You can elaborate as much as you’d like on the design, add a bigger headboard, chunkier legs, different material used will give a different effect with the textures etc.

Next time, I’ll be back with adventures in expanding foam, to show you how I make modular cavern walls….

Grim’s Dungeons of Doom: Starting at the bottom, Dungeon Floors.

31 Jul


PART 3: The Base Board.

As promised, here’s the next part of the dungeon build. This time we are going to be talking about making dungeon floors, more specifically a flagstone floor base board like the one in my own modular dungeon system.


First off your going to need a large board as the base for your floor. I used a piece of hardboard for mine, its cheap and easy to work with. You could use whatever you want, I just used it as I have several big bits laying around, but MDF or thin ply would do just as well. The added bonus for me at least is that large thin pieces are easy to store behind wardrobes and other furniture out of harms way until I need to use it. If storing large pieces is  problem, you could use smaller bits that fit together (even though I have one big main one, I do have a couple of smaller ones for when I run out of room to create bigger dungeons.)

What you will need for this method is textured foam backed bathroom mosaic tiled wallpaper. Using this stuff is fantastic for terrain making in general, its uses go far beyond just dungeon flooring. It saves a ton of time carving and making detail, as its all done for you.


As you can see, it has a raised stone effect pattern. Ideal for simulated flagstones. At 28mm size it has loads of detail that will give you a brilliant effect, check out this close up and you’ll see what I mean.


It comes in a variety of colours, all of which are just as good (since you’ll be painting it anyway) If your willing to fork out for a roll of it, it’ll set you back under £10 (thats in the UK, I’m pretty sure you can track down something similar in the rest of the world) If you don’t want to put your hand in your pocket, a good way of getting it is to visit your local decorating or DIY shops, or where ever sells wallpaper where you are. Most of the time, these shops will be more than willing to give you big sample pieces for you to take home. A good idea if your doing this, is to not reveal what you want the bits for, just tell them your redecorating and not making models with it! Another way to get sample pieces is to go online and ask. This is better for smaller terrain bits since they are usually A4 sized sheets (easy for the companies to send through the post) My advice is to go and buy a roll or two of your preferred textured paper, it’ll serve you well and you’ll have more than you’ll ever need. The online ordering of samples is good too as you’ll be able to go to at least 10+ different places and get loads of free textured sheets for other projects, these below are some decent ones I’ve been using during this build.





Ok, so back to the build. The next bit is quite simple, no big mystery. Get your board and stick your paper to it! You can use PVA or wallpaper paste, although PVA dries quicker.make sure if you have more than one piece to stick to the board, to line it up carefully and accurately of it’ll look wrong.

Once you have done that and its dry, paint it up black with either cheapo spray, or some other cheap paint. You can by all means use acrylic, but I recommend using the cheapest way you can, as you can get through a ton of paint if your making large areas like this. Water based emulsion wall paint is great if you can get it in black or dark grey (I think its called latex paint elsewhere)

As you can see, my dungeon pieces are grey stone, so I advise for the uniformity and look you use the same colour scheme and tones for the whole dungeon. I achieve this by the emulsion method. I use the same mid grey wall paint for everything then it all tones in.

Once you have the undercoat done, gradually start drybrushing the board with dark grey graduating up to your desired tone you prefer (if you use emulsion, you can use cheap white emulsion to lighten it up,what ever you can get your hands on.)

Don’t forget to seal it in with some matt varnish (I used several coats,which is why some thought I’d used linoleum for the flooring, which you could do, although it might make the process more expensive, and your board lots heavier!)


And thats all there is to it. if you follow this process and advice, you’ll have a base board for your dungeon similar to mine! as you can see from the above pic, it looks very cool, and requires minimal effort and is quick to do.

So, I hope you enjoyed this article and got something out of it, so next time I’ll be telling you how to construct your wall pieces, again really quick and simple and a nice end result. Ciao!!

Grim’s Dungeons of Doom: Errata??!!

29 Jul


Just checking the last post, only to find the post lost back on the 20th of the month!! (For what reason, I really don’t know, since I wrote this today!) So if you’d like to read the first and latest installment of Dungeons of Doom, click the link and take a look!

Grim’s Dungeons of Doom: The Beginning…

Related articles

Grim’s Dungeons of Doom: The beginning…

20 Jul


So, I thought I would start a little set of articles detailing my attempt to create a modular 28mm fantasy dungeon on a budget. This has been in the works since having the idea many moons ago, I just hadn’t decided a way to execute the project in the way I needed it. Sure I could have made floorplans or a 2.5D type such as DM Scotty and the like, but since my dungeon would be used for dungeon skirmish gaming rather than traditional D&D sort of RPG play, I didn’t think I needed such an array of parts that would be needed to cover every eventuality (There’s still quite a lot of bits to make it feel right, just not as many as RPG play)


Continue reading

%d bloggers like this: