Advertisements

Grim’s Dungeons of Doom: Realm of the Dead; Metal railed walls.

8 Jul

thinlogo

DSCF6491

This time in the realm of the dead themed terrain set, we are going to tackle some simple metal railed walls, using an easy to find and mostly free material, packaging foam.

Sorry about the delay in the latest installment of Grim’s Dungeons of Doom, I must say that I have been taken up with some side projects, so I do apologise!

This is quite an easy make, nothing too taxing for these, but the end result is quite pleasing.

So, you’ll need some packaging foam, cocktail sticks and a few other things, so lets get started…

DSCF6193

Ok, before I start I want to highlight the type of foam packaging that I’m using here, Polyethlene foam, found in some boxes which it has been used as packaging, sometimes the packing peanuts are made out of it too, it’s rubbery and quite dense, best of all, its free if you have had a purchase or fished it out of the garbage! DM Scotty used it to great effect in this video here:

DSCF6195

So, armed with the foam, we are going to start cutting this up to make 4 wall sections. To make this kind of wall, we need three uprights and two longer mid sections to form each one. So I measured about 4cm lengths for the uprights before I cut the longer sections. This is due to me making the entire wall section measuring the same length as my longest dungeon wall sections, that way they can be used universally with the rest of the sets. The mid parts were easily worked out by simply lying out the cut base (not pictured, sorry) and cutting them accordingly. you should know me by now, measurements are limited, just make your judgement and go with it!

DSCF6194

Right then, as with much of what has come before, get some textured wallpaper and clad each element. the foam is pretty forgiving so you can use some heavy duty glue if you like, stuff like PVA won’t cut the mustard. I tend to use £shop contact/impact adhesive as it gives a quick and sturdy bond. I can’t say it’s suitable for every job, but it won’t react to this foam (which it can do with some styrenes and materials, so test it on some samples before you use it!) A quick note for alternatives instead of the foam. You need a soft material for this make (as you’ll see later) so polystyrene could do, although don’t use impact/contact adhesive with it, it’ll melt, so PVA is the best cause of action probably. Another caution with contact/impact adhesive is that make sure you have ventilation or you’ll be at risk of getting high as a kite! (or worse)

DSCF6196

As you can see, the bases are cut quite thin, this is to make the sections fit to other elements of the dungeon set and the edges fit flush to other bits. I prepared the pieces with the glue (covering each side to be bonded with the impact adhesive and left to almost dry, as you need to with the glue) Then put them together.

DSCF6197

As you can see the walls are coming together nicely, once they are bonded firmly, lets get into the railings.

DSCF6198

Get some toothpicks and trim them all to the same size. 10-12 per side will do, although it’s up to you. Mark out the central line and divide it out with points to insert the picks. Poke the holes before you set them in the soft foam, then apply. Make sure they all come to the same height and glue them into position (superglue works fine for this)

DSCF6199

Next, get a length of bamboo skewer and poke it into the foam upright pieces on the wall adjacent and touching the pointy tips like in the picture. also glue these in place. (You can also get a needle and cotton and bind each connection to add some detail, but that’s up to you, I didn’t bother)

DSCF6200

Then I cut three small squares out of the thick cardstock to cap each pillar on the wall.

DSCF6201

Again, another smaller sized square was added and glued on top to finish the detail. You could add small rounded beads or adornments for added detail, or even a 15mm figure to act as a statue at the ends, which looks pretty cool. I opted for plain, as I had other ideas for the set.

DSCF6203

Paint or spray up, then proceed with the painting.

DSCF6204

DSCF6205

Building up gradually with shades of dark grey to light, to white, adding a wash or two (black and brown) to muddy the thing up.

DSCF6206

Add your metallics to the bars, then follow with a black wash to dull it down.

DSCF6208

Use a fine brush and add detail to finish (cracks and tiles) Then your done. that’s it your walled railings are done. You could add extra detail, a bit of flocking/static grass/etc if you want it to look more outdoors. make them as personalised as you like for your set.

DSCF6491

Next time, not only will I show you the next part of this themed set: Tomb monoliths, but I’ll show you just how these cheap and cheerful elements start coming together to form this themed tabletop environment.

L8R.

 

 

Advertisements

6 Responses to “Grim’s Dungeons of Doom: Realm of the Dead; Metal railed walls.”

  1. Sleepy Hollow Restored July 8, 2016 at 12:20 am #

    Great job as always!

    Liked by 1 person

    • grimace73 July 8, 2016 at 12:31 am #

      Thanks! Quite a simple one for this article, but in the next one, I’ll show the pics of all the elements together (They look the part when put into context with each other!) 😉

      Like

  2. daggerandbrush July 8, 2016 at 3:35 am #

    Again a simple, effective way to make soem great looking terrain. Using the wallpaper is quite effective to depict stone.

    Liked by 1 person

    • grimace73 July 8, 2016 at 10:08 pm #

      thanks! The wallpaper is good, as it’s really cheap and easy to get hold of, you can get it here for as little as a £1 in the discount bin at the DIY shops, so I happen to have a load of it!

      Like

  3. Roger Webb July 9, 2016 at 11:32 am #

    Inspiring work as always, Will.

    Cheers Roger.

    Like

    • grimace73 July 10, 2016 at 12:51 pm #

      Thanks Roger! I’ve got a few more Realm of the dead segments left, which add to the sets ambience. they’ll be up over the net couple of weeks!

      Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: