Advertisements

Grim’s Dungeons of Doom: Starting at the bottom, Dungeon Floors.

31 Jul

457

PART 3: The Base Board.

As promised, here’s the next part of the dungeon build. This time we are going to be talking about making dungeon floors, more specifically a flagstone floor base board like the one in my own modular dungeon system.

DSCF5252

First off your going to need a large board as the base for your floor. I used a piece of hardboard for mine, its cheap and easy to work with. You could use whatever you want, I just used it as I have several big bits laying around, but MDF or thin ply would do just as well. The added bonus for me at least is that large thin pieces are easy to store behind wardrobes and other furniture out of harms way until I need to use it. If storing large pieces is  problem, you could use smaller bits that fit together (even though I have one big main one, I do have a couple of smaller ones for when I run out of room to create bigger dungeons.)

What you will need for this method is textured foam backed bathroom mosaic tiled wallpaper. Using this stuff is fantastic for terrain making in general, its uses go far beyond just dungeon flooring. It saves a ton of time carving and making detail, as its all done for you.

DSCF5254

As you can see, it has a raised stone effect pattern. Ideal for simulated flagstones. At 28mm size it has loads of detail that will give you a brilliant effect, check out this close up and you’ll see what I mean.

DSCF5255

It comes in a variety of colours, all of which are just as good (since you’ll be painting it anyway) If your willing to fork out for a roll of it, it’ll set you back under £10 (thats in the UK, I’m pretty sure you can track down something similar in the rest of the world) If you don’t want to put your hand in your pocket, a good way of getting it is to visit your local decorating or DIY shops, or where ever sells wallpaper where you are. Most of the time, these shops will be more than willing to give you big sample pieces for you to take home. A good idea if your doing this, is to not reveal what you want the bits for, just tell them your redecorating and not making models with it! Another way to get sample pieces is to go online and ask. This is better for smaller terrain bits since they are usually A4 sized sheets (easy for the companies to send through the post) My advice is to go and buy a roll or two of your preferred textured paper, it’ll serve you well and you’ll have more than you’ll ever need. The online ordering of samples is good too as you’ll be able to go to at least 10+ different places and get loads of free textured sheets for other projects, these below are some decent ones I’ve been using during this build.

DSCF5256

DSCF5259

DSCF5260

DSCF5261

Ok, so back to the build. The next bit is quite simple, no big mystery. Get your board and stick your paper to it! You can use PVA or wallpaper paste, although PVA dries quicker.make sure if you have more than one piece to stick to the board, to line it up carefully and accurately of it’ll look wrong.

Once you have done that and its dry, paint it up black with either cheapo spray, or some other cheap paint. You can by all means use acrylic, but I recommend using the cheapest way you can, as you can get through a ton of paint if your making large areas like this. Water based emulsion wall paint is great if you can get it in black or dark grey (I think its called latex paint elsewhere)

As you can see, my dungeon pieces are grey stone, so I advise for the uniformity and look you use the same colour scheme and tones for the whole dungeon. I achieve this by the emulsion method. I use the same mid grey wall paint for everything then it all tones in.

Once you have the undercoat done, gradually start drybrushing the board with dark grey graduating up to your desired tone you prefer (if you use emulsion, you can use cheap white emulsion to lighten it up,what ever you can get your hands on.)

Don’t forget to seal it in with some matt varnish (I used several coats,which is why some thought I’d used linoleum for the flooring, which you could do, although it might make the process more expensive, and your board lots heavier!)

DSCF5197

And thats all there is to it. if you follow this process and advice, you’ll have a base board for your dungeon similar to mine! as you can see from the above pic, it looks very cool, and requires minimal effort and is quick to do.

So, I hope you enjoyed this article and got something out of it, so next time I’ll be telling you how to construct your wall pieces, again really quick and simple and a nice end result. Ciao!!

Advertisements

8 Responses to “Grim’s Dungeons of Doom: Starting at the bottom, Dungeon Floors.”

  1. Roger Webb August 1, 2015 at 8:40 pm #

    Cracking post Skull, I’ve used a similar technique for a base board of Marthian landscape using a paper close to the pebble type you showed, but I’d never thought of the flagstone effect. Many thanks I’ll be using this a some point.

    Cheers Roger

    Liked by 1 person

    • grimace73 August 3, 2015 at 2:51 am #

      Thanks mate! yeah, wallpaper is great stuff, even the non textured stuff can be put to use for terrain making. I do love the textured ones though, they save loads of time doing detail!!

      Like

Trackbacks/Pingbacks

  1. Grim’s Dungeons of Doom: Another brick in the wall (Creating the wall structures) | The Grinning Skull - August 7, 2015

    […] and decide how to size your wall sections. I used rough measure for mine so it’d size up visually on my board, so therefore the pattern of the wallpaper dictated my intial measure, although it’s totally […]

    Like

  2. 4xD: But hey Mr Grim, I wanna’ game my dungeon in 15mm…. | The Grinning Skull - October 5, 2015

    […] mosaic squares that would be more akin to 15mm flagstones but I don’t see why the same dungeon flooring could not be used. Another idea would be to acquire some nice cheap or free floorplans in PDF form […]

    Like

  3. Grim’s Dungeons of Doom: Scraping the barrel, making mini barrels. | The Grinning Skull - October 25, 2015

    […] getting hold of textured wallpaper samples like I’ve been going on about in the walls and floors tutorials. It seems like those of you especially in the US are finding it difficult  to get hold […]

    Like

  4. Five Link Friday: Lying on the Floor | AnarchyDice - November 13, 2015

    […] The Grinning Skull […]

    Like

  5. Grim’s Dungeons of Doom: Rising up, Easy level Riser tiles for your set up! | The Grinning Skull - December 5, 2015

    […] don’t know what that means, check out the article here. The top can be clad again using the dungeon floor method from the earlier article by using textured wallpaper. If you can’t get it, use the simple […]

    Like

  6. Grim’s Dungeons of Doom: Realm of the Dead; Necropolis Obelisk | The Grinning Skull - August 9, 2016

    […] if you prefer as all you need is a column. Once you have the shape, clad it on the sides, with the textured wallpaper like before. I didn’t need to clad the top as I added a new bit to the […]

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: